Cutting problem-- Some point of the same piece of materials cannot be cut through

Cutting problem-- Some point of the same piece of materials cannot be cut through


Reasons:

1. The needed focus is lost

  • Wrong focus length  

For standard laser head(2" lens), the focus length is 6mm, 4 inch laser head, the focus length is 10mm.



TYPE
DOT SIZE
FOCAL DISTANCE
FUNCTION
STANDARD 2"
0.0039″(0.099mm)4.5mm~6.5mmCutting material less than 10mm, Engraving photos within 500 DPI
4"
0.0039″(0.099mm)9.0mm~11mmCutting material more than 10 mm


Solution:

Set correct focus length.


  • Bending of material or uneven working table

The bending of the material or the uneven working table can result in different focal lengths, especially for the large cutting graphic.


Solution:

Please fix the material with magnet and check if the working table are the same height.

If it's needed, calibrate working table according to the link below.

How to calibrate the working table to level


2. The focus lens and reflective mirror are dirty or damaged

   

 



If the focus lens and reflective mirror are dirty or damaged, also will affect the cutting effect.


Solution:

Clean lens and all reflective mirrors and check if they are in good condition. 


How to clean the optical parts, below link  is for reference.

This video is come from our old customer Robert Kofoed

3. The laser beam path is not aligned

Solution:

Laser beam path adjust video

  • Mirror alignment

When the laser head move to four corners of the working table, check if the laser beam lasers to the same position on the third reflective mirror.

  • Vertical alignment 

When the laser head moves to four corners of the working table, check if the laser beam can vertically go through the 10mm acrylic.

 

 

Please check laser beam path according to the video below.


END

    • Related Articles

    • Cutting problem– Why the starting point of a cutting graphic can’t meet with its end point

      Problem description: This problem is due to the different movement of the belt on both sides of the Y-axis, which lead the belt is not synchronized. Reasons: 1. There are some ways to improve the cutting problem by adjusting software. 1) An option of ...

    • Thunder laser tips wood cutting

      When we use just the right power and speed to cut,there is no excessive charring of the cutting area. As we reduce the cutting speed the charring of the cutting edges deepens. As we increase the cutting power the charring of the cutting area also ...

    • How to cut smooth acrylics

      Introducing how to cut acrylic more smoothly Today we’re going to talk about how to improve your cut smoothness when you’re cutting acrylic and encounter a cut that isn’t smooth. For an even weaker blowing effect, it is recommended to use it with the ...

    • Rotary axis attachment has a wrong cylindrical engraving/cutting size

      Problem description: The engraving/cutting size is incorrect when you using the rotary attachment.  Reasons: 1. Wrong circle pulse or diameter  (1) Circle pulse Check the gear ratio on your rotary attachment.  Gear ratio 4:1 structure, like below. ...

    • Why the waves appear during cutting - The line is not straight

      Problem description: Waves appear when cutting straight line or circular. Noted： Regularly check whether there is any dirt stuck between the belts and gears of the X-axis or Y-axis first, which may affect the trajectory of the belt. So we need to ...