Why the "Origin" button of LCD panel not working?

Why the "Origin" button of LCD panel not working?

Reasons:

1. Wrong starting point is set in software

Solution:

select current position as starting point in softwares.

RDWorks:

Locate on the bottom left corner, the option of "Position" please select to Current position.


Lightburn:

Locate on the bottom left corner, the option of " Start from", please select to current position. 


2. Origin setting is not proper on LCD panel

Solution:

Open origin setting windows: Z/U or Menu button>>origin set+.

Make sure the "Multiple Origins Enable" is not selected, like below.



End.

    • Related Articles

    • Alarm message of LCD panel-No enough extend space

      Problem description: LCD panel shows the following information: Reason: 1.This problem only appears on engraving mode, it's caused by the buffer distance is out of bound.  For example, if you want to engrave a picture of 200×200mm, you move the laser ...

    • Alarm message of LCD panel--Machine protected（Old type sensor)

      Question: LCD panel shows the following information: Reasons: 1. The doors with sensor are not closed Our machine has protection sensors for door (front cover and laser tube cover), like below. Solution: Please close all the doors before starting ...

    • Alarm message of LCD panel--Machine protected(New type sensor)

      Problem description: LCD panel shows the following information: Reasons: 1.The door with sensor not close Our machine has sensors for door protection, we've installed 5 door sensors totally. 2 mounted at top flap, 1 mounted at the front door, 1 ...

    • LCD panel keeps showing"Connecting to controller"

      Problem description: The LCD panel keeps showing "Connecting the controller" even if reboot the machine.  Reasons: 1. Controller board is faulty The controller board is faulty.  Solution: Turning the machine on, open the right side door and see if ...

    • Laser cutter's LCD panel in Chinese

      If your laser cutter’s LCD panel is in Chinese, how to solve it? 1. click “Z/U” button 2. select “语言设置”and then press “Enter” to confirm 3. select “英文”and press “Enter” to confirm Now it’s in English.  Below video is for reference.