Stock Nova series Air Assist pump
This stock air pump outputs about 5psi at 4.23 cfm. The cali air 8010 can output 90psi at 2.2cfm, for reference
The manual is attached below
Related Articles
Retrofitting Dual Air Assist
for Thunder Laser Nova series machines with single air-assist. This is an advanced level installation. Here are all of the resources we have on this: Please see attachment Additional resources: Dual Air Assist Theory of Operation and Schematics How ...Dual Air Assist Theory of operation and schematics
This is a typical installation of the dual stage air-assist in the Nova series machines. Your configuration may differ slightly. The maximum recommended operating system pressure, according to Thunder China Engineering, is now 40 psi to help prevent ...Nova Series User's Manual
Please see attached: ENDThunder Laser Dual-Stage Air Assist sequencing issues
Thunder Lasers with dual-stage air assist systems sometimes experience sequencing issues. This anomaly is predominately occurring when the laser is connected to the PC via USB. If you toggle air assist ON in LightBurn the high volume stage should ...Dual-stage Air Assist Sequencing issues
1. Problem description: The machines are equipped with dual air assist have an issue: Set High blow for job and run the job from software, the air assist on the machine is Low assist channel on. But if you run it from machine, it's normal. 2. ...