RDWorks plug-in installation instructions

• Related Articles

• ThunderCAM Installation - Lightburn camera

  NOTE: its a good idea to tape it up first and view it before you stick it down. The mounts are 3d printed and the adhesive is strong. Removal would likely break it. If you happen to get it upside down  (many do) that's no big deal, just take out the ...

• USB connection-RDWorks

  1. Connect the laser machine and PC with the USB cable that came with the machine.   2. Install the software, please install the USB driver first before press "Install".  3. Open RDWorks and test the connection as following:   4. Then you can ...

• How to import PDF files into RDWorks

  1. RDWorks cannot read PDF and open it directly.   2. Use CorelDraw to open/import PDF file firstly. Then save the graphic as DXF file.  Like below:     3. Then RDWorks can read the DXF file, Just import the DXF file into RDWorks directly.   4. The ...

• Why USB connection is not working-RDWorks

  Reasons: 1. USB cable is loose or faulty Solution: Unplug the USB cable and plug it back, try again. If re-plug the cable, problem still exists. 2. USB driver is not installed successfully Before you install the software, please install the USB ...

• Why does the graphic size that imported to RDWorks different from its original size

  Reason: If the file being imported is DXF format, the problem maybe the original file and RDWorks have     different units. For example, the unit of the original DXF file is “inch”, but in RDWorks, the DXF unit is set as “mm”. When you import the DXF ...