Material Test for All CO2 Glass Tubes
Test with 3mm plywood, LightBurn software, Engraving(Fill) and Cutting(Line) modes , 60W, 80W, 100W, 130W tubes.
Engraving(Fill)
60W
80W
100W
130W
Cutting(Line)
60W
80W
100W
130W
Material test file download
The lbrn files are attached
Related Articles
Laser engraving tips-How to hold down warped material
1. When the engraved material is uneven As we work, we are likely to encounter uneven material, which will affect our cutting and engraving results In the case of uneven material： The effect of our engraving may be inconsistent in depth, which is the ...Why does the glass tube's power is unstable
Problem description： The laser power is unstable in the same layer, which causes different depths of graphics in different positions in the same layer. Reason： 1. The focus lens & reflector mirrors is dirty Dirty lenses reduce the laser reflectivity ...How to replace the Nova series DC tubes
Firstly, turn off the whole machine power. Video: Instructions (may vary but the principle is the same): Remove old part: 1. Unplug the wire between laser tube and laser power supply and take out from the hole, like below. 2.unfix the tube. ① ...How to improve engraving quality in the scan mode of X-swing
The engraving quality working on x_swing is generally worse than x_unilateralism, it usually results in ghosting effect or image offset or bi-directional engraving offset, like below. Notice : We generally use plywood or acrylic to test. x_swing ...Nova Series User's Manual
Please see attached: END