Lightburn-Scan offset testing

Lightburn-Scan offset testing

You can download the file for adjust Scan Offset setting.
    • Related Articles

    • RDWorks-Scan offset testing

      You can download this file to  test and adjust the Scan Offset settings.
    • Reverse compensation/Scan offset

      Before you use the laser machine.  Please remove the transparent bag from the front of honey comb plate. The transparent bag has a set of USB flash drive, and an engraving test sample. The USB flash drive stores software, manuals, libraries, etc… ...
    • How to improve engraving quality in the scan mode of X-swing

      The engraving quality working on x_swing is generally worse than x_unilateralism, it usually results in ghosting effect or image offset or bi-directional engraving offset, like below. Notice : We generally use plywood or acrylic to test. x_swing ...
    • Lightburn software download site

      Lightburn software download site:https://lightburnsoftware.com/
    • ThunderCAM Installation - Lightburn camera

      NOTE: its a good idea to tape it up first and view it before you stick it down. The mounts are 3d printed and the adhesive is strong. Removal would likely break it. If you happen to get it upside down  (many do) that's no big deal, just take out the ...