How to remove the honey comb table

How to remove the honey comb table

The honey comb table needs to be cleaned after using for a period of time, how to remove it for clean, this video is for reference.


    • Related Articles

    • How to calibrate the working table to level

      1. Two sides of the working table are not of the same height Turn off the whole machine power, manually pull one of the belts of Z axis so as to adjust the up and down of the working table height of this side and calibrate the level in this way. ...

    • Reverse compensation/Scan offset

      Before you use the laser machine.  Please remove the transparent bag from the front of honey comb plate. The transparent bag has a set of USB flash drive, and an engraving test sample. The USB flash drive stores software, manuals, libraries, etc… ...

    • Nova Series User's Manual

      Please see attached: END

    • Odin Series User's Manual

      Please see attached: END

    • Preventative maintenance checklist

      This article is for Nova series machines. Proper care and routine maintenance of the machine will ensure optimal performance over a long service life. DAILY CHECK LIST ☑ Focus lens WEEKLY CHECK LIST ☑ Reflector ☑ Laser combiner ☑ Keep machine clean ...