How to import PDF files into RDWorks

How to import PDF files into RDWorks

1. RDWorks cannot read PDF and open it directly.

 

2. Use CorelDraw to open/import PDF file firstly. Then save the graphic as DXF file. 

Like below:

 

 

3. Then RDWorks can read the DXF file, Just import the DXF file into RDWorks directly.

 

4. The other way is open/import PDF file with CorelDraw，use the plugin button “Laser Running “ to import the graphic into RDWorks

 

End

 


    • Related Articles

    • RDWorks plug-in installation instructions

      RDWorks plug-in installation instructions

    • Why does the graphic size that imported to RDWorks different from its original size

      Reason: If the file being imported is DXF format, the problem maybe the original file and RDWorks have     different units. For example, the unit of the original DXF file is “inch”, but in RDWorks, the DXF unit is set as “mm”. When you import the DXF ...

    • USB connection-RDWorks

      1. Connect the laser machine and PC with the USB cable that came with the machine.   2. Install the software, please install the USB driver first before press "Install".  3. Open RDWorks and test the connection as following:   4. Then you can ...

    • How to prepare your files for feeding into the laser program to engrave

          The laser machine can only burn into or through material. Also, the beam can only be made to follow straight or curved paths or to burn a grid of dots (a bitmap image). There is no way for the laser to represent color. 1. Scanned Image Engraving ...

    • Ethernet cable connection-RDWorks

      How to connect with a Ethernet cable Connect the laser cutter system to desktop or laptop via an Ethernet cable. 1. Configure computer  Go to Start >> Control Panel >> Network and Sharing Center, configure the connection for local  connection, like ...